Raizo group - Morse Taper Finishing Reamer

Home >> >> Products >> Cutting Tools >> Morse Taper Finishing Reamer

MORES TAPER FINISHING REAMER

Finishing reamers are used to size and smooth holes. Also used to remove nicks and burrs from machine spindles

As per B S 328

DIN 204 D

SIZE SMALL DIA LARGE DIA FLUTE LENGTH ORDERING OPTIONS

INCH MM INCH MM SQUARE HEAD SHANK TAPER SHANK

CATALOG CODE NUMERIC CODE CATALOG CODE NUMERIC CODE

MT 0 0.257 6.54 0.382 9.72 61 RMTR - S0 - 0061 108101 RMTR - T0 - 0061 108111

MT 1 0.376 9.57 0.506 12.86 66 RMTR - S1 - 0066 108102 RMTR - T1 - 0066 108112

MT 2 0.580 14.73 0.735 18.67 79 RMTR - S2 - 0079 108103 RMTR - T2 - 0079 108113

MT 3 0.787 20.01 0.977 24.82 96 RMTR - S3 - 0096 108104 RMTR - T3 - 0096 108114

MT 4 1.032 26.22 1.275 32.41 119 RMTR - S4 - 0119 108105 RMTR - T4 - 0119 108115

MT 5 1.491 37.87 1.801 45.76 150 RMTR - S5 - 0150 108106 RMTR - T5 - 0150 108116

MT 6 2.132 54.17 2.559 65.01 208 RMTR - S6 - 0208 108107 RMTR - T6 - 0208 108117

[Contact Us] [Disclaimer]

SIZE	SMALL DIA		LARGE DIA		FLUTE LENGTH	ORDERING OPTIONS
	INCH	MM	INCH	MM		SQUARE HEAD SHANK		TAPER SHANK
	INCH	MM	INCH	MM		CATALOG CODE	NUMERIC CODE	CATALOG CODE	NUMERIC CODE
MT 0	0.257	6.54	0.382	9.72	61	RMTR - S0 - 0061	108101	RMTR - T0 - 0061	108111
MT 1	0.376	9.57	0.506	12.86	66	RMTR - S1 - 0066	108102	RMTR - T1 - 0066	108112
MT 2	0.580	14.73	0.735	18.67	79	RMTR - S2 - 0079	108103	RMTR - T2 - 0079	108113
MT 3	0.787	20.01	0.977	24.82	96	RMTR - S3 - 0096	108104	RMTR - T3 - 0096	108114
MT 4	1.032	26.22	1.275	32.41	119	RMTR - S4 - 0119	108105	RMTR - T4 - 0119	108115
MT 5	1.491	37.87	1.801	45.76	150	RMTR - S5 - 0150	108106	RMTR - T5 - 0150	108116
MT 6	2.132	54.17	2.559	65.01	208	RMTR - S6 - 0208	108107	RMTR - T6 - 0208	108117